Description
DS-OLS8-FPD Stand Alone Open Loop – Pulse Type – Apply to Size 23, 24,34 of Step Motors
incl. 19% VAT
KOCO offers 3 different microstepping drivers which is pulse and direction mode based. And also dynamic closed loop stand alone electronic is available.
From Min. 2.2A [up to NEMA17 Stepper size] to Max. 7.6A [up to NEMA34 Stepper size], convenient drivers can be chosen. Pulse/RS485 supported closed loop driver and Pulse/RS485/CC-Link supported open loop electronics are available.
DS-OLS8-FPD Stand Alone Open Loop – Pulse Type – Apply to Size 23, 24,34 of Step Motors
Specification | DS-OLS8-FPD |
---|---|
Applied Motor | DS-OLS8-FPD can operate Max. 7.8A of motor |
Power Supply | 24 – 72V DC V |
Output Current | 2.8A-7.8A/Phase(Peak Value) A |
Drive Method | Bi-Polar PWM drive |
Input Signal (Pulse Signal,Offline Signal,Direction Signal) | Optocoupler input voltage H = 3.5 – 26V , L = 0 – 0.8V,Conduction current 6-15mA |
Output Signal Alarm output | Photoelectric isolation output, maximum withstand voltage 30VDC, maximum saturation current 50mA |
Size | 118 × 78 × 34 mm |
Weight | About 300 g |
Operation Environment Precaution | Avoid dust, oil mist and corrosive gas |
Humidity | < 85 % RH, No condensation |
Temperature | 0°C – +40 °C |
Cooling | Installed in a ventilated environment |
Technical specifications are for guidance only, as the individual drives and motors are configured for specific applications. Subject to technical and visual changes.